User Manual

Installation

________________________________

________________

Boomer II User Manual & Integrator’s Guide

Wavenet Technology 14 BM210012WT09

Mounting the Boomer II OEM Modem to Your Device

The Boomer II OEM Modem has an M2 Mounting Bolt hole in each

corner, which should be used to bolt the modem onto an appropriate

surface. The mounting hole pattern is four holes in a 60mm X 46mm X

42mm trapezoid, with each hole to suit an M2 (2.0mm) bolt. Refer to

the following diagram.

The mating surface should be flat and ensure a rigid mounting for the

modem to minimise the transmission of vibration to the unit.

There should be an adequate supply of airflow to ensure the modem’s

temperature limits are not exceeded.

Top View

Side View

Mounting Details

Hole diameter:

4 x 2.30mm

Fixing screw size: