User's Manual

ManualsBrandsWaveLynx Technologies ManualsElectronicsUSB 13.56 MHz RF Front end reader/writer.

Page 5 of 14

you can use the information on your secure access card and let the reader “type” the password for you by just

reading the card.

Configuration Software

Configuration Software Configuration Software

Configuration Software Tool (CST)

Tool (CST)Tool (CST)

Tool (CST)

The card holds information that is strictly numeric in nature. That is, it holds a number that has

information embedded in it (e.g. badge identification number, facility code, etc…). Often, it’s desirable to “break

out” these information fields and add descriptive or control data to conform to any given access systems

conventions. Or, you may want to obfuscate the information so that the card information it is not easily

readable by unauthorized viewers. This is the purpose of the CST included with your reader. A simple example is

when typing in the password for email, you press the enter key on the keyboard to actually submit the

password. The CST can be used to automatically append this enter key press every time you read the card. So

you don’t have to press the enter key manually.

Step by Step

Step by Step Step by Step

Step by Step Software

Software Software

Software Installation

InstallationInstallation

Installation

Step 1:

Step 1:Step 1:

Step 1: After downloading the installation directory, navigate to its location within your system and extract its

contents by right clicking on the zipped folder and selecting Extract all…

Extract all…Extract all…

Extract all…. This will unzip the installation directory

and place the extracted folder in your current location.

Step 2:

Step 2:Step 2:

Step 2: Open the installation directory to view its contents. Double click on WaveLynxReader_Setup.exe

WaveLynxReader_Setup.exeWaveLynxReader_Setup.exe

WaveLynxReader_Setup.exe to begin

the installation process. If a popup appears requesting permission for the application to make changes to your

computer, select Yes

YesYes

Yes. The installation will proceed from here.

If another popup appears stating that the application requires that a newer version of Java be downloaded

please select Yes

YesYes

Yes to download the correct version of Java and install it.

Step 3:

Step 3:Step 3:

Step 3: Once the installer appears, select the folder where you would like the application to be installed, or

leave it as the default location.

Step 4:

Step 4:Step 4:

Step 4: Select Install

Install Install

Install from the bottom right hand corner of the installer to install the application on your system.

Step 5:

Step 5: Step 5:

Step 5: A popup will now appear asking if you would like to create a desktop shortcut to access the logical

access reader software. Select Yes

Yes Yes

Yes if you would like a shortcut, or No

NoNo

otherwise.

Congratulations, you have now successfully installed your WaveLynx Logical Access Reader software.

Congratulations, you have now successfully installed your WaveLynx Logical Access Reader software.Congratulations, you have now successfully installed your WaveLynx Logical Access Reader software.

Congratulations, you have now successfully installed your WaveLynx Logical Access Reader software.