User's Manual

- 5 -
1. Overview
WL-C2400 provides safe RF wireless communication with Point-to-Point Topology.
WL-C2400 is an RF wireless communication module operating in the 2.4GHz ISM Band Frequency
Hopping method and can apply to equipment using serial interface, and long distance communication
is possible at high speed.
WL-C2400 can be configured according to the required type by AT command.
Applications are conveniently configured and can be applied in various fields.
1.1 Regulatory Information
SIMPLIFIED EU DECLARATION OF CONFIRMITY
The simplified EU declaration of conformity referred to in Article 10(9) shall be provided as follows:
Hereby, Wavelabs Co., Ltd. declares that the radio equipment type 2.4GHz wireless modem is in
compliance with Directive 2014/53/EU.
Freqeuncy Range Output Power (Max.)
2400~2483.5 MHz Below 20 dBm
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION : Changes or modifications not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
FCC Caution: Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate this equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)
This device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
RF Radiation Exposure Statement:
This equipment complies with RF radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with a minimum distance of 20 cm between the radiator and
your body. This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following
two conditions: (1) this device may not cause interference, and (2) this device must accept any interference,
including interference that may cause undesired operation of the device.