User's Manual

- 19 -
5.4 LED status indication
LED status indication is as follows
Item Description Number of LED
TX RF data transmission status indication 1 EA
RX RF data reception status indication 1 EA
POWER Module power status indication 1 EA
＊ In command Mode, only the power LED is on
Fig 7. LED indication
5.5 ANTENNA
When using the WL-C2400, it is recommended to use the antenna listed below.
Item Type Part name Gain (dBi)
1 Dipole antenna W5E-WO-01 4.5
±
1
Fig 8. ANTENNA Connector