User's Manual

- 17 -
4 Installation
There are several factors to consider when preparing to deploy a wireless network, and several
factors are described below in no specific order.
4.1 Network Topology
WL-C2400 operates in 2.4GHz ISM band and supports Point to Point Topology.
4.2 Throughput
WL-C2400 supports up to 250kbps asynchronous transmission speed
4.3 Distance
Physical distance between products is affected by required antenna performance and height
4.4 Terrain
Along with distance, terrain should take into account antenna performance considerations. The term “line
of sight” (LOS) means being able to see one location from another location, which is the minimum
requirement for a radio signal path. That is, the LOS should be secured to minimize the effect on the RF
communication link.
4.5 Power requirements
WL-C2400 uses DC input voltage +5 VDC.
(If the supply voltage/current does not meet the requirements, normal operation may not be possible or
the product may be damaged)
4.6 Interference
WL-C2400's FHSS (Frequency Hopping Spread Spectrum) operation works normally in environments
where there may be in-band interference, and Frequency Limiting (Hopping Zone) is a built-in function
that can be used to avoid a specific frequency or frequency range.