User's Manual

WaveIP Ltd.
WipAir Installation Guide
Page
8
of 33
• Dynamic asymmetric capacity - up/downstream throughput is optimized
according to the actual traffic load.
• Output Power – High Tx power and high dynamic range.
• Versatile radio – increase flexibility and scalability:
o Configurable channel bandwidth (5/10/20/40 MHz) maximizes capacity
and availability.
o Multiple frequency bands in one radio.
• RF interference robustness - WipAir introduces unique and innovative
interference mitigation mechanisms:
o Automatic Interference Sensibility - proprietary solution that
increases RF robustness by eliminating false receptions of noise thus
maintaining stable operation with constant throughput and latency.
o Hitless ACM - Adaptive Modulation and Coding (modulation can be
defined manually as well).
o Fastest ARQ - Automatic Retransmit reQuest.
• 256-bit AES encryption – non-compromising security.
• Networking and QoS – built in QoS in both PTP and PTMP modes:
o Bandwidth control – define maximum throughput for each direction
(uplink and downlink) independently.
o 8 priority queues – packets are classified according to TOS and VLAN
priority into the queues (7 = highest priority and 0 = lowest priority).
o Packet filtering: IP, VLAN and broadcast filters.
o VLAN tagging/stripping per terminal.
• Licensed and unlicensed radios:
o 6.0 – 7.0 GHz
o 4.9 – 6.0 GHz
o 3.3 – 3.8 GHz
o 2.3 – 2.7 GHz
o 700 – 900 MHz
• Real time synchronization - by GPS or internal. WipAir built in time
synchronization technology allows collocation of multiple MUs on the same
tower and on collocated towers while reusing frequencies, eliminating self-
interference between them.