Manualshelf

User's Manual

ManualsBrandsWaveIP ManualsElectronicsPoint-to-Point & Point-to-Multipoint broadband wireless bridge
21222324252627282930
WaveIP Ltd.
WipAir Installation Guide
Page
24
of 33
WipAir 8000
The Indoor Outlet side cables assembled as follows:
5. Crimp the RJ-45 Plugs on cable ends to form the Outdoor Unit cable.
6. Plug the Outdoor Unit cable to the RJ-45 Jack marked “PWR LAN-OUT”.
7. Plug standard CAT5 cable from the PC to the RJ-45 Jack marked “LAN-IN”.
8. Plug the AC Input to the power (100-240VAC).
Note: Do not attach standard CAT5 cable from the PC to the Indoor Unit RJ-
45 jack marked “PWR LAN-OUT”. It may cause damaged to the
Ethernet NIC in the PC.
To 100-240VAC To Outdoor Unit (MU/SU) To Ethernet
Figure
2-9: WipAir 8000 PoE