User's Manual
WaveIP
Ltd.
WipAir 6000/3000 Installation Guide
Page
22
of 32
2
2
.
.
3
3
.
.
6
6
C
C
a
a
b
b
l
l
e
e
s
s
Straight CAT5 Gauge 24-shielded outdoor rated cable must be installed between
Outdoor Unit and Indoor Outlet. The cable should be UV resistant, flame retardant,
UL listed and contain at least 4 twisted pairs.
The outdoor cables scheme is given in Appendix A
–
Outdoor Cables Scheme.
The Indoor PoE Outlet side and Outdoor Unit side are crimped using RJ-45 tool.
CAT5 cable must not exceed 300 feet (91 meters).
The Outdoor Unit side will be assembled according to the following steps (Figure 2-4):
• Insert seal bracket (grommet clamping plate) on the cable.
• Insert rubber seal (grommet) on the cable.
• Crimp the RJ-45 Plug.
Figure
2-4: Cable preparation for Outdoor Unit
• Insert the RJ-45 to the Outdoor Unit (Figure 2-5).
• Insert NC-6 screws with spring washer to the seal bracket.