User's Manual

November 2003
Rev. A
Page 4 of 4
1. Introduction
1.1. General
Congratulations on your purchase of the WaveIP GigAccess™ 900 self-install
Business/Residential Subscriber Unit (RSU).
This document describes how to install and use your subscriber unit to obtain wireless high-speed
Internet access. You can connect your RSU both to a computer and to a local area network (LAN)
through the integrated two ports.
1.2. GigAccess
TM
900 System Overview
GigAccess
TM
900 is WaveIP’s wireless point-to-multipoint broadband communication system. The
basic subsystem – a Sector, consists of an AU (Access Unit) and up to 128 Subscriber Units
(SUs) Each with full-duplex communication SUs and the WAN via the AU.
Figure
1-1 depicts a general description of a typical sector in the GigAccess™ 900 system.
Base Controller
(Option)
AU
AU
Switch/Router
SU
SU
WAN
RSU
BSU
Figure 1-1: General Description of typical sector in GigAccess™ 900 System