User's Manual

February 2003
Rev. A
Page 42 of 47
10.3.6. Stop Logger
Disables the output of log messages (Admin user only).
10.3.7. Clear Log
Clears the log window.
10.3.8. Log to File
When pressing the Log to File button, the “GigAccessUnitManager.log“ is cleared and all log
printed to the log window are also printed to the log file. The log file is placed in the application
directory and can be opened only when the Log to File button is released.
10.3.9. View Log
Opens the “GigAccessUnitManager.log“ in Notepad. Can be done only if the Log to File button is
released.
10.3.10. Reset Text
Gets the Last reset reason and prints to the log window and log file.
10.4. Installation Window
The Installation Window provides a simple to use installation and configuration of the general
parameters of the unit. The window contains both AU and SU fields. The appropriate fields are
disabled when connecting to an AU or SU unit.
Figure 10-3: Installation Window in Unit Manager Tool
The Installation window contains the following fields:
Ø MAC Address – the Unit unique MAC Address.
Ø IP Address – the Agent IP Address. This field can be configured.
Ø Subnet Mask – the Agent Subnet Mask. This field can be configured.
Ø Default Gateway – the default gateway the Agent needs to use for transfer packets out of
its subnet. This field can be configured.