User's Manual

February 2003
Rev. A
Page 40 of 47
10. Appendix G - Using the Unit Manager Tool
10.1. General
The Unit Manager Tool is used for installation and configuring the Unit (AU or SU).
A technician that installs and maintain an AU or an SU should use this tool.
The tool is divided logically into two levels, standard and advanced. At startup the tool
automatically direct the technician into a simple installation page that includes all the information
needed to install the unit. When the need arises the technician can select another pages and
operations in order to perform more complex infrequent operations (like burning a new firmware
etc.).
The tool has the ability to discover GigAccess™ Units connected to the network and allows
configuration of one unit at a time.
This manual gives a short description of the features available and is using terms from the
GigAccess™ system. A more complete and detailed manual will be available shortly.
10.2. Menu Commands
10.2.1. Selecting adapter
The adapter used by the GigAccess™ Unit Manager can be selected in the
MenuàToolsàSelect Adapter. A list of the adapter list installed in the computer is shown.
Select the appropriate adapter and press ok. The adapter selected is saved in the application
configuration file.
Figure 10-1: Adapter Selection Window in Unit Manager Tool