User Instructions

1. Assembly
Mount the included brush head on top of the toothbrush handle's metal shaft with the bristles
facing forward. Apply gentle pressure downwards until you hear a click. There should be a small
gap between the brush head and handle.
To replace a brush head, grip from the top and pull directly away from the toothbrush handle
until it detaches. Attach a new brush head following the instructions above.
2. Rinsing
Before every brushing, rinse the brush head with fresh water to moisten the bristles. Apply your
desired amount of toothpaste on the head.
3. Select Brush Mode
Your W-1 toothbrush features 4 brushing modes to adjust to your needs:
Clean - 41,000 rpm - Standard mode for superior daily cleaning
White - 48,000 rpm - Deep cleaning mode for surface stains, polishing and vigorous cleaning
Sensitive - 31,000 rpm - Gentle cleaning along the gumline
Attachment - 33,000 rpm - Gentle face cleaning (requires an external attachment)
To begin brushing, press the power button. Select the brush mode by pressing the power button
again until your desired mode's LED light is illuminated. By default, Clean mode is selected when
the toothbrush is powered on for the rst time.
Note: Mode selections can be made within 5 seconds of each other. After 5 seconds, the current
mode will lock and the next press of the power button will shutdown the toothbrush.
To power down the toothbrush, wait at least 5 seconds after turning it on and
then press the power button.
Brushing