User`s guide

Making a Clock Analysis Measurement
Setup Directions
• Connect signal to Channel 1.
Most Tools default to Channel 1, however, the input channel can be changed. For single-ended
measurements, use just the top input SMA leaving the bottom unconnected. For differential
measurements, connect to Input and Input-.
• Open the Clock Analysis tool by selecting the Clock and Clock Analysis buttons.
• Press Single/Acquire
on the toolbar or the Single/Acquire button on the front panel. Some results
require repeated runs to acquire; you can press Run
to get those values.
See Interpreting Clock Analysis Views for descriptions of the different ways of displaying the measurements
made by the Clock Analysis Tool.
Section 4 - GigaView © WAVECREST Corporation 2005
50