User`s guide

ATTACHING PERIPHERAL DEVICES TO THE SIA-3000

Connecting an External Monitor

The SIA-3000 has the option of connecting a VGA-compatible monitor for a larger viewing area.

Ensure the device driver is available for installation.

Power down the SIA-3000.

 Attach the monitor cable to the VGA connection on the back panel of the SIA-3000.

Tighten the retaining screws.

 Power up the monitor before powering up the SIA-3000.

 Power up the SIA-3000.

* If the system requires a new monitor driver, select the files from the c:\win98 directory (see

procedure below)

 Select ‘Next’ to verify the installation procedure.

 Select ‘Search for the best driver for your device.’

 Specify a location: c:\win98

Windows will detect the driver

 Select ‘Next’ to install the driver

 Select ‘Finish’

Connecting a GPIB Cable to the SIA-3000

 Attach the GPIB cable connector to the GPIB (IEEE.488) interface card connector on the

back panel of the SIA-3000. Tighten the thumbscrews.

WAVECREST Corporation 2005