User`s guide

Passing values do not necessarily reflect actual SIA noise floors. These values only reflect the
measurement of the calibration signal. If the values pass, it is still possible that a calibration will
improve accuracy or noise floors. The verification just ensures that the instrument will meet
basic specifications.
In some cases, this calibration verification may be too simplistic with coarse values. If a more
thorough verification is desired, check with Wavecrest for additional procedures.
Press Close when finished with calibration verification and continue with the appropriate
calibration procedure below if any channel does not pass verification.
Performing Calibrations
• Click on Perform Calibration… to access the Calibration dialog box.
• Select appropriate calibration option.
Appendix C © WAVECREST Corporation 2005
284