User`s guide

Connecting Power to the SIA-3000

The power supply of the SIA-3000 operates with a line voltage in the range of 100 to 230VAC

at 50-60 HZ line frequency.

 Position the instrument where it will have sufficient clearance for airflow around the back

and sides. A minimum of 2-3 inches clearance is required for the back and sides.

 Connect the power cord to the rear of the

instrument and then to an ac outlet. Ensure the

outlet has a protective earth ground contact.

NOTE: The power supply fan will automatically turn

on when power is connected to the instrument.

WAVECREST Corporation 2005