User`s guide

Switch Matrix Tool – DSM-16x
Overview
The WAVECREST DSM-16(x) is intended to extend the input capability of the SIA-3000™. In
Compatibility mode, the DTS-207x input capability can be extended from 2 to 16 channels as a 1 of 8
matrix to the DTS channel input (1 of 8 to channel 1, and 1 of 8 to channel 2 — See Figure below). The
DSM-16(x) includes an RS232C cable for connecting to the
SIA-3000 and DTS-207x Series of Digital
Time Measurement products.
SIA or
DTS
Connecting a DSM-16 to the SIA-3000
Connect the DSM-16 to the SIA-3000 using the 25-pin serial cable provided with the DSM-16. A 9-pin
to 25-pin adaptor, included with the DSM, is needed to connect the cable to the back of the
SIA-3000
RS-232 serial port.
Power-up both units; the DSM-16 should be started before the GigaView software is initialized.
If the DSM-16 is connected after the SIA-3000 is operating, select Edit on the SIA-3000 menu bar and
choose Co
nfiguration.
© WAVECREST Corporation 2005 Section 4 - GigaView
249