User`s guide

DTS-550™ Setup
Connect the DTS-550 to the SIA-3000™ using an IEEE 488 cable to the back of both units.
Using the SIA-3000 GigaView software, select Other Tools on the tool menu.
Next, select Jitter Generator on the Other Tools menu.
The
SIA-3000 will begin to communicate with the DTS-550; this may take several seconds for the
initialization of the DTS-550.
From the Dialog Bar the user can select Output Settings, Sync Settings and Jitter Settings
.
Once the Jitter Generator is configured; press Tool on the front panel or select the tool icon
using the
mouse to open the desired measurement tool.
Section 4 - GigaView © WAVECREST Corporation 2005
248