User`s guide

9
Menu Navigation and Display Control Buttons - Activates pull-down menus of
GigaView software and allows navigation/selection of menu choices and online Help system. Display
control buttons scroll through open tools, add or close tools or clear all tools.
Press on the Menu button to activate the
pull-down menus of the GigaView Menu
bar.
Press on the Tab button to jump from
field to field in the active GigaView tool.
Arrow buttons - Press on an arrow to move the
highlighted cursor area up or down the
active pull-down menu or to the adjacent
pull-down menu.
Pressing on Clear button clears active tool
of any measurements or plots.
Pressing the Next button will switch to
the next tool or view.
Pressing on the Close button closes the
active tool
Pressing the Add View button will open a
new window of the active tool.
10
Power Button - Turns on/off SIA-3000.
11
Calibration OUT - Supplies calibration and reference signals for calibrating the SIA-3000.
10
Section 2 - Front and Back Panel Description © WAVECREST Corporation 2005