User`s guide

CHANNEL-to-CHANNEL TOOLS
Propagation Delay and Skew
Data Bus
Locktime
Strip Chart – See Clock Strip Chart Tool
Propagation Delay & Skew Tool
Making A Propagation Delay & Skew Measurement
Setup Directions
This tool requires signals connected to each measurement channel.
• Verify the proper input signal levels.
• Connect a signal to any input channel.
• Connect a signal to any open input channel.
Times will be measured from chosen edges on the first channel to chosen edges on the second channel.
Device
Under
Test
Input Output
© WAVECREST Corporation 2005 Section 4 - GigaView
221