User`s guide

4
Tool Function Buttons - Used for displaying tool selections, starting/stopping measurements, clearing
current display measurements, disabling all tools and enabling markers.
Pressing on this button will display GigaView tool buttons on the display. Pressing on the
corresponding Tool/Field Selection button will activate the desired measurement tool.
Continuously acquire new measurements.
Measurements will be acquired until either the
Single/Stop button is pressed or an error occurs.
Acquires a single measurement. Also used to stop a
series of measurements from being taken after the
Run button is pressed.
Dial - Used to increment/decrement values of active field or
scroll through choices of active field.
Clears active window of data.
Stops all running tools simultaneously.
Performs a pulse find. Performs a peak-to-peak voltage
measurement and sets the voltage threshold to be used for timing measurements.
Scrolls through Marker options by displaying current selection on window. Selections include: Horizontal
markers only, Vertical markers only, both Horizontal and Vertical markers or no markers.
8
Enables displayed Marker option.
5
Keypad - Keypad is used for entering values into active fields. The “<” button is used as a backspace
button to erase the highlighted number or the number immediately to the left of the cursor.
6
USB Connector/Macro Buttons - USB connectors are for keyboard and pointing device accessories.
Macro buttons are for recording and playing macros.
USB Connectors - For connecting included USB accessories or any other hot swappable peripheral devices
to instrument. An additional USB connection is located on the back panel. If connecting a USB
device other than those provided by
WAVECREST , make sure the device driver is available for
installation.
Press on the Rec. button to begin recording a series of
steps from the front panel, mouse or keyboard that
can then be replayed using the
Play button.
Press on the Play button to playback a series of steps
that were previously recorded from the front panel,
mouse or keyboard.
Section 2 - Front and Back Panel Description © WAVECREST Corporation 2005