User`s guide

Random Data with Bit Clock Theory of Operation
This tool automates a few different operations related to the Propagation Delay/Skew Histogram.
The Data signal is connected to Channel 1 and Bit Clock Signal is connected to Channel 2, therefore, two
histograms can be made. One histogram represents a measurement of Data RISING edges to clock
reference edge; the other represents Data FALLING edges to the clock reference edge.
These histograms would show many modes or distributions because there are many possible
relationships between clock and data edges. These histograms are filtered to show only those times that
relate to the measured Data edges closest in time to the Reference Clock Edge.
© WAVECREST Corporation 2005 Section 4 - GigaView
151