User`s guide

PREFACE
Organization
The manual is divided into three Sections and three Appendices. The following is a brief description of
the information contained in each section. For quick reference to specific information, refer to the Table
of Contents.
SECTION 1 — Introduction
This section introduces the user to the OE-2. Features and capabilities are described. An overview of the
internal operation of the OE-2 is also included.
SECTION 2 — Description
Describes the front and back panels of the OE-2.
SECTION 3 — Set-up and Measurement
Describes the installation and set-up of the OE-2 as well as using Virtual Instruments Signal Integrity™
software through a
WAVECREST SIA-3000 or DTS-207x instrument.
APPENDIX A — Specifications
This section contains a comprehensive set of specifications for the OE-2.
APPENDIX B — GPIB Commands
Includes various parameters, values and codes necessary for implementing remote control of the OE-2 via
the IEEE-488 interface.
APPENDIX C — Preprogrammed Measurement Limits
Includes a series of tables that show the preprogrammed measurement limits for each OE-2 model.
WARNING
Operating the OE-2 outside of the maximum operational specifications
published in Appendix A of this manual can damage the instrument.
The Wavecrest Warranty does not cover damage resulting from
improper operation or mishandling of the OE-2.
OE-2 Preface |
v