User`s guide

Calculated Measurement Accuracy
Extinction Ratio
12
..................................................±1 dB
Optical Modulation Amplitude
12,13
....................... ±12%
Notes:
12. Using an SIA-3000, M3.2 Channel Card, VISI software with
a 100-125 MHz square wave, 850 nm, average optical power
level of –5 dBm (per Fibre Channel or Gigabit Ethernet
standards)
13. Percent of reading.
Miscellaneous Characteristics
Calibration Interval................................................1 year
AC Mains Voltage ..................................... 90-264 VAC
AC Mains Frequency........................................50/60 Hz
-0.2
0.0
0.2
0.4
0.6
0.8
1.0
1.2
0 200 400 600 800 1000 1200 1400
-9
-8
-7
-6
-5
-4
-3
-2
-1
0
1
700 800 900 1000 1100 1200 1300 1400 1500 1600 1700
Wavelength (nm)
Responsivity (dB)
-6
-5
-4
-3
-2
-1
0
012345
Picoseconds
Typical OE-2 Responsivity versus Wavelength.
OE-2 Impulse Response to a 650 femtosecond mode-locked
laser impulse (full bandwidth, 20 dB amplifier selected).
Notes:
A. Typical measurements provide non-
warranted information about system
performance or capabilities.
B. Wavecrest continually engages in research
related to product improvement. New
material, production methods, and design
refinements are introduced into existing
products without notice as a routine
expression of that philosophy. For this
reason, the OE-2 may differ in some respect
to the specifications stated in this document.
C. The OE-2 will comply with these
specifications after a 30-minute warm-up
period.
OE-2 Frequency Response (calculated from the FFT of a
650 femtosecond mode-locked laser impulse; full bandwidth,
20 dB amplifier selected).
| APPENDIX A | Specifications
20