User manual

3Wavecom WMOD2B Modem
INSTALLATION/START-UP
2 INSTALLATION/START-UP
2.1 Mounting the modem
For mounting the modem, bind to the body the holding bridles according to the schema below:
2.2 Installing the modem
To install the modem, plug the device on a DC power supply (for automotive applications, connect the device on
the permanent « + » and insert the SIM card in the holder).
Make sure that an antenna is connected.
In order to extract or to insert the Micro SIM card, it is necessary to press the SIM holder ejector
with a sharp element (a pen for example).
If this sequence is not respected, the SIM holder could be damaged.
2 mm
Holding bridles
Figure 2
Modem mounting
Note:
- To be attached to a plain surface
- Screw head max. height: 2mm