Specifications

VärmeKabelTeknik Switchpointheating


3
Components

Velox Switchpoint heating element
Heatingelementsaredeliveredincustomizedlengths
withfittedquick‐connectdevices.
Theelementsaretested,insulationmeasuredwithhigh
voltageappliedandmarkedwithtype.



Velox installation channels
Stainless‐steelchannelsaresuppliedinlengthsof1mor
0.5mandasstandardchannelsorslottedchannels,for
exampleforclearingthepointrodfasteningdevice.


M
ounting clips for Velox switchpoint heating
Normally,therequirednumberofclipsaresuppliedfor
installinganorderedswitchpointheatingsystem
comprisingelements,aconnectioncableandsensors.
Donotforgettostatethetypeofrailusedintheswitch.



Velox point rod heater
Thepointrodheaterismountedoverthepointrodpit.
Therodmustbekeptfreefromsnowandiceandheatis
suppliedtothecriticalpointsontheswitch.
Thepointrodheaterissuppliedintwocompletehalves,
whichareeasilymountedoverthepointrodpit.

Connectionismadetoaspeciallyorderedflexiblelead
connectormountedontheheatingelementforstock‐
rail.

Connection block for switchpoint heating
Waterproofrubberconnectingblocksmouldedinone
piece.
Theblocksaresuppliedcompletewithmountingplates
formountingonsleepersandtension‐relievingcovering
plates.
Theblockhasa4/8‐conductorconnectioncable
mouldedintoit,length10m.
Theblocksareavailablewith2or4outlets.


