Specifications

WM_PRJ_Q2501_PTS_002 - 001
March 2004
confidential ©
Page: 75 / 79
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged
without prior written agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à
des tiers sans son autorisation préalable.
9 Manufacturers and suppliers
This section contains a list of recommended manufacturers or suppliers for the
peripheral devices to be used with the WISMO Quik Q2501 module.
9.1 System connector
The system connector is a 80-pin 50 Ω SMT connector with 0.5 mm pitch from
MOLEX. For further details about this connector, refer to document [2].
The matting connector from MOLEX has the following part number:
 52991-0801
For further details about this connector, refer to appendix 10.1.
More information is also available from http://www.molex.com
9.2 SIM Card Reader
 ITT CANNON CCM03 series (see http://www.ittcannon.com
)
 AMPHENOL C707 series (see http://www.amphenol.com
)
 JAE (see http://www.jae.com
)
Drawer type:
 MOLEX: (see http://www.molex.com
)
 Connector: MOLEX 99228-0002,
 Holder: MOLEX 91236-0002.
9.3 Microphone
The microphone selected must comply with the GSM recommendations in
terms of frequency response.
A list of possible suppliers is given hereafter:
 HOSIDEN (see http://www.hosiden.co.jp/
)
 PANASONIC (see http://www.panasonic.com/industrial/components/
)