Specifications

WM_PRJ_Q2501_PTS_001 – 003
March 2004
© 2003 All rights reserved
Page:
41
/
93
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written
agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son
autorisation préalable.
2.6.3 Peripheral Bus
One peripheral bus is available on the WISMO Quik Q2501 System Connector. It
can be used to drive SPI peripherals (3-wire interface) or standard 2-wire
peripherals.
The choice between these two types of peripherals is exclusive due to signal
multiplexing.
2.6.3.1 SPI bus
The SPI bus includes clock (SPI_CLK), I/O (SPI_IO) and enable signals (SPI_EN,
SPI_AUX) complying with SPI bus standard. The maximum speed transfer is
13 Mb/s.
Pin description
Signal Pin # I/O I/O type Description
SDA/SPI_IO 28 I/O CMOS/3X SPI data signal
SCL/SPI_CLK 30 O 3X SPI clock
SPI_EN 48 O 3X Main SPI enable signal
Multiplexed with GPO3
SPI_AUX 46 O 3X Auxiliary SPI enable signal
Multiplexed with GPO0
WISMO Q2501
Application
Peripheral
SDA/SPI_IO
SCL/SPI_CLK
SPI_AUX
SPI_EN
Figure 15: SPI Bus