Specifications

WM_PRJ_Q2400_PTS_002 - 001
24th October 2002
confidential ©
Page :
16 / 80
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged
without prior written agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à
des tiers sans son autorisation préalable.
2.4 LCD interface
The WISMO Quik Q24x6 Series can be connected to a LCD module driver
through either a SPI bus or a two wires interface.
2.4.1 SPI bus
The SPI bus includes a CLK signal, an IO signal and an EN signal complying
with SPI bus standard.
Pin description
Signal Pin number I/O I/O type Description
SPI_CLK 10 O 1X SPI Serial Clock
SPI_IO 8 I/O CMOS / 1X SPI Data
SPI_EN * 28 O 1X SPI Enable
* Multiplexed with GPO3.
2.4.2 Two wires interface
The two wires interface includes a CLK signal and a DATA signal complying
with a standard 96KHz interface. The maximum speed transfer is 400Kb/s.
Pin description
Signal Pin number I/O I/O type Description
SCL 10 O 1X Serial Clock
SDA 8 I/O CMOS / 1X Data
2.5 SPI Auxiliary bus
A second SPI Chip Enable (called SPI_AUX) has to be used to add a SPI
peripheral to the WISMO Quik Q24x6 Series.
Pin description
Signal Pin number I/O I/O type Description
SPI_CLK 10 O 1X SPI Serial Clock
SPI_IO 8 I/O CMOS / 1X SPI Data
SPI_AUX * 26 O 1X SPI Aux. Enable
* Multiplexed with GPO0.
A
A
A
T
T
T
A
A
A
T
T
T