Specifications

WM_PRJ_Q2400_PTS_002 - 002
24th January 2003
confidential ©
Page :
39 / 81
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged
without prior written agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à
des tiers sans son autorisation préalable.
2.14 ON / ~OFF
This input is used to switch ON or OFF the WISMO Quik Q24x6 Series module.
A high level signal has to be provided on the pin ON/~OFF to switch ON the
module. The level of the voltage of this signal has to be maintained between
2.4V and VDD during a minimum of 1000ms. This signal can be left at high
level until switch off.
To be able to switch OFF the module, the pin ON/OFF has to be released.
Through the firmware, the module can be switched off (using the CPOF
command).
Pin description
Signal Pin number I/O I/O type Description
ON/
∼
OFF
6 I CMOS Module Power ON
Electrical Characteristics
Parameter Min Max Unit
Input Impedance ( R ) 10
k
Ω
Input Impedance ( C ) 50 pF
Operating conditions
Parameter I/O type Min Max Unit
V
IL
0 V 0.6 V V
V
IH
2.4 V VDD+0.5V V