User manual

Wavecom Instruments Portable Appliance Testers Instruction Manual

Press the key to disable.

Press the key to enable.

Label Options - Only on Selected Memory Models

Changing the label options changes the way the printer behaves or how the tag is printed. When selecting this

option you will be prompted with 3 different options. Enable / Disable, Choosing a label set and modify the due

date.

Enable / Disable

Selecting this option will enable or disable the tag information being sent to the zebra printer. The printer can

also be disabled by switching the printer off from the power switch located on the side of the printer. Once the

printer is switched back on it will not print out the records that were created while the printer was switched off.

Press the key to disable.

Press the key to enable.

Choose Label Set:

If you have more than one logo in the printer‟s memory (multiple company logos) this function will allow you to

select the various logos. If you have one logo stored in the printer then you only need to choose Label 1. If

you choose anything else a blank tag will be created. If you have multiple logos then the next one to choose

would be label1 and so on. If you are unsure which one to choose select the Label 0.

Read the onscreen message and then press the key.

Press the key to increase the label number.

Press the key to decrease the label number.

Press the key to select the displayed label number.

Customise Next Test Due Dates

Enabling this feature will allow customise next test due dates when testing equipment. When this feature is

disabled (default setting) the next test due date is determined by the test date plus the frequency of test.

When enabled a custom date can be set after visual test in TnT +M models.

Press the key to enable.

Press the key to disable.

Stop Labels Spooling On Power On

If the printer is spooling tags on power on then it has reverted back to the factory default settings. To stop this

choose the F3 key when prompted. The printer must be switched on and have a solid green light. If not, the

printer won't receive the command.

Press the key to enable.

Press the key to disable.