User manual

Wavecom Instruments Portable Appliance Testers Instruction Manual

Testers fitted with Optional Comms Ports have the Capability to have other add-ons like the

Wavecom Tag Printer and Scanner to allow you to print and scan your own labels on site.

However WinPats Software needs to be loaded onto a laptop / PC to have the ability to

Datalog your test results and to control any automated testing.

Memory Unit with Comms Port

For Testers fitted with TnT (TnT +, M and +XM) Memory option a PS2 „Y‟ Splitter Interface

Cable is required. This couples the Tester to both the Keyboard and the Scanner. The

tester links directly into the printer via a special TnT Serial Comms cable, and sends the

print command to the printer. This enables the printer to print the designated label.

Optional

WinPats is required as you still need to upload or download files from the Tester to a PC.

The Tester is fitted with a memory module so it will retain the test results in its memory. The

benefit of this is that a Laptop / PC is not required in the field. With WinPats and a PC,

you have the benefit of full Test and Asset management plus Record Keeping.

TNT Options Menu

Introduction

Here you can adjust the way the TnT behaves under certain tests and other TnT functions. Some TnT options

are not available to some TnT models. Some options are only available to TnT memory units.

To access the TnT options menu:

From either the Enter barcode screen (memory unit) or the main menu A screen hold down the return

button .

With this button held down press the F2 key