Instruction manual
32
Press the key to disable.
Press the key to enable.
Label Options - Only El Memory & Plus Memory Models
Changing the label options changes the way the printer behaves or how the tag is printed. When selecting this option you will be
prompted with 3 different options. Enable / Disable, Choosing a label set and modify the due date.
Enable / Disable:
Selecting this option will enable or disable the tag information being sent to the zebra printer. The printer can also be disabled
by switching the printer off from the power switch located on the side of the printer. Once the printer is switched back on it will
not print out the records that were created while the printer was switched off.
Press the key to disable.
Press the key to enable.
Choose Label Set:
If you have multiple printer tag logos stored in the printer (meaning different company logos) this function will allow you change
this. If you have one logo stored in the printer then you only need to choose Label0. If you choose anything else a blank tag will
be created. If you have multiple logos then the next one to choose would be label1 and so on. If you are unsure which one to
choose select the Label0.
Read the onscreen message and then press the key.
Press the key to increase the label number.
Press the key to decrease the label number.
Press the key to select the displayed label number
Custom Next Test Due Dates:
Enabling this feature will allow custom next test due dates when testing equipment. When this feature is disabled (default
setting) the next test due date is determined by the test date plus the frequency of test. When enable a custom date can be set
after visual test in the memory TnT units.
Press the key to enable.
Press the key to disable.
Stop Labels Spooling On Power On:
If the printer is spooling tags on power on then it has reverted back to the factory default settings. To stop this choose the F3
key when prompted. The printer must be switched on and have a solid green light. If not, the printer won't receive the command.