Specifications

Integra M2106+
Erreur ! Style non défini.
©Confidential
Page: 73 / 77
This document is the sole and exclusive property of Wavecom. Not to be distributed or divulged without prior written
agreement.
WA_DEV_M2106+_PTS_003-001 April, 2007
8 Annexes
8.1 Supplier Information
8.1.1 General Purpose Connector
The mating connector for the Integra M2106+ Wireless CPU
®
General Purpose Connector is made by
SAMTEC France (
http://www.samtec.com/).
Many SAMTEC products are available via SAMTEC dealers throughout the world.
Figure 24: High and low profile CLP connectors
For better fastening of the M2106+ on the application, Wavecom recommends the use of a low-profile
connector.
Figure 25: Flexible flat cable (Part number: FFSD-20-S-10-01-N)
Figure 26: Flex cable connector (Part number: FLE 125 01LDVA)