Technical data

The RTC can continue to operate even though VCC is removed,
provided that a sufficiently charged backup device is connected to the
VRTC. Refer to section
4.20 for details.
NOTE
The relevant characteristics of the ON/OFF Power control interface are shown in the
table below.
Parameter Conditions Min Typ Max Unit
μA
Input low (0V), VCC = 3.6V -60 -25 -12
Input current
Input high (VCC), VCC = 3.6V 0 1
μA
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without prior written agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à des tiers sans son autorisation préalable
GR64 Integrators’ Manual
Page: 52/106