Specifications

Product Technical Specification & Customer Design Guidelines
Interfaces
Please refer to the following documents for the details of controlling the ADC access:
© Confidential
Page: 49 / 116
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without
prior written agreement.
WA_DEV_Q64_PTS_001-003 January 9, 2009
• [4] AT Command Interface Guide for Open AT
®
Firmware v6.5
[9]
[5] Q64 software user guide
• [6] AT Command Manual for GR64 and GS64 Wireless CPU
®
3.10.2 Pin Description
Signal Pin number I/O I/O type Description
26
ADIN1* I Analog A/D converter
27
ADIN2 I Analog A/D converter
28
ADIN3 I Analog A/D converter
13
ADIN4 / GPIO5 I or
I/O
Analog or
2V8-1
A/D converter or
GPIO5
*This input can be used for battery charging temperature sensor, see chapter “3.13 Battery Charging
interface “.
3.10.3 Application
The ADIN1/BAT-TEMP input is used for battery monitoring during charging of battery.
All information is provided in the “Battery Charging” (see chapter
3.13).