Specifications

Product Technical Specification & Customer Design Guidelines
Appendix
© Confidential
Page: 113 / 116
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without
prior written agreement.
WA_DEV_Q64_PTS_001-003 January 9, 2009
The Wireless CPU
®
Q64 connected to a development kit board application is certified
to be in accordance with the following Rules and Regulations of the Federal
Communications Commission (FCC).
Power listed on the Gant is conducted for Part 22 and conducted for Part 24.
This device contains EGSM/GPRS Class 10 functions in the 900 and 1800MHz Band,
which are not operational in U.S. Territories.
This device can be used only for mobile and fixed applications. The antenna(s) used
for this transmitter must be installed at a distance of minimum 20 cm and must not
be co-located or operated with any other antenna or transmitter.
Users and installers must be provided with antenna installation instructions and
transmitter operating conditions for satisfying RF exposure compliance.
Antennas used for this OEM module must not exceed 0.9 dBi gain for GSM 850 MHz
and 7.1 dBi for GSM 1900 MHz for fixed operating configurations. For mobile
operations the gain must not exceed 0.9 dBi for GSM 850 MHz and 3.1 dBi for GSM
1900 MHz. This device is approved as a module to be installed in other devices.
Installed in portable devices, the RF exposure condition requires a separate
mandatory equipment authorization for the final device.
The license module will have a FCC ID label on the module itself. The FCC ID label
should be clearly seen through a window or must be visible when an access panel,
door or cover is easily removed.
If not, a second label must be placed on the outside of the device that contains the
following text: FCC ID: O9EWMP100
This device complies with Part 15 of the FCC Rules. Operation is subjected to the
following conditions:
• This device may not cause harmful interference.
• This device must accept any interference received, including interference that
may cause undesired operation.
IMPORTANT:
Manufacturers of mobile or fixed devices incorporating Q64 Wireless
CPU
®
are advised to:
• clarify any regulatory question,
• have their completed product tested,
• have product approved for FCC compliance, and
• include instructions according to above mentioned RF exposure statements in
end product user manual.
Please note that changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the equipment.