User manual

Wavecom GSM Modem
This confidential document is the property of WAVECOM and may not be copied or circulated without permission
46
Application to GSM AT+CRC=0 extended reports disabled
GSM to application OK command valid
Application to GSM AT+CRC=1 extended reports enabled
GSM to application OK command valid
Default value is stored in E2PROM.
7.3. Echo E
Determines whether the mobile echoes (sends) the commands you enter
to your computer screen as you type them..
Application to GSM ATE0 no local echo
GSM to application OK command valid
Application to GSM ATE1 local echo
GSM to application OK command valid
7.4. Fixed DTE rate +IPR
This commands specifies the data rate at which the DCE will accept
commands.
Application to GSM AT+IPR?
GSM to application +IPR: 9600
OK
current rate is 9600 bps
Application to GSM AT+IPR=?
GSM to application +IPR:(),(2400,9600,19200,38400,576
00,115200)
OK
possible values. No
autodectable rate supported
Application to GSM AT+IPR=38400
GSM to application OK new rate is 38400 bps
7.5. Back to online mode O
If you have established a connection and the mobile is in online
command mode, this command allows to return to online data mode.
Application to GSM ATO
GSM to application OK command valid