User manual

Wavecom GSM Modem
This confidential document is the property of WAVECOM and may not be copied or circulated without permission
45
GSM to application +CME ERROR : 4 bearer not supported
7.2. Report control +CR, +CRC
7.2.1. Outgoing call +CR
This command enables a more detailed service reporting, in case of data
outgoing call. Before sending the CONNECT response to the application, the
GSM module will precise the type of data connection that have been
established.
These report types are :
+CR: ASYNC for asynchronous transparent
+CR: REL ASYNC for asynchronous non-transparent
Application to GSM AT+CR=0 extended reports disabled
GSM to application OK command valid
Application to GSM AT+CR=1 extended reports enabled
GSM to application OK command valid
Default value is stored in E2PROM.
7.2.2. Incoming call +CRC
This command enables a more detailed ring indication, in case of
incoming call (voice or data). Instead of the string "RING", an extended string
is used to indicate which type of call is ringing.
These extended indications are :
+CRING: ASYNC for asynchronous transparent
+CRING: REL ASYNC for asynchronous non-transparent
+CRING: VOICE for normal speech.
+CRING : FAX for fax calls