User manual

Wavecom GSM Modem
This confidential document is the property of WAVECOM and may not be copied or circulated without permission
43
GSM to application RING
+CLIP: 146290800,145
incoming call
Application to GSM AT+CLIP=0 CLIP OFF
GSM to application OK command valid
6.7. Connected line identification presentation +COLP
This command allows control of the connected line identification
presentation supplementary service.
AT+COLP=<n>
* <n> : (result code presentation status in the TA)
0 disable
1 enable
Application to GSM AT+COLP=1 COLP on
GSM to application OK command valid
Application to GSM AT+COLP? ask for current functionality
GSM to application +COLP: 1,"x"
OK
"x" = 0 COLP not provisionned
"x" = 1 COLP provisionned
"x" = 2 unknown (no network ...)
Application to GSM ATD146290800; outgoing call
GSM to application +COLP: 146290928,145
OK
Application to GSM AT+COLP=0 COLP OFF
GSM to application OK command valid