User manual

Wavecom GSM Modem
This confidential document is the property of WAVECOM and may not be copied or circulated without permission
35
Application to GSM AT+CMGS="[phone]"<CR>
Hello, how are you ?^Z
Send a message in text
mode
GSM to application +CMGS : 116
OK
Successful transmission
GSM to application +CDS : 2,116, "[phone]",145,
"13/01/96 12h30m00s","14/01/96
20h51m05s",16
5.10. Read message +CMGR
This command allows the application to read incoming stored messages.
AT+CMGR=<index>
+CMGR=<stat>,<oa>,<scts>[,<tooa>,<fo>,<pid>,<dcs>,<sca>,<tosca>,
<length>]<CR><LF><data> (for SMS-DELIVER only)
This command is also available in PDU mode.
+CMGR=<stat>,<length<CR><LF><pdu>
Example :
GSM to application +CMTI: "SM",1 New message received
Application to GSM AT+CMGR=1 read the message
GSM to application +CMGR: "REC UNREAD",
"43322449"<CR>
To be or not to be!
OK
Application to GSM AT+CMGR=1 read again the message
GSM to application +CMGR: "REC READ",
"43322449",20<CR>
To be or not to be!
OK
Application to GSM AT+CMGR=2 read + bad index
GSM to application +CMS ERROR: 321 error : invalid index
Application to GSM AT+CMGR=1 in PDU mode
GSM to application +CMGR: "REC READ",
<length><CR><LF><pdu>
OK