User manual

Wavecom GSM Modem
This confidential document is the property of WAVECOM and may not be copied or circulated without permission
34
1 If CBM is stored into ME/TA, indication of the memory location is routed
to the TE using unsolicited result code :
+CBMI : <mem>, <index>
2 New CBMs are routed directly to the TE using unsolicited result code.
+CBM : <length><CR><LF><pdu> (if PDU mode chosen)
or
+CBM :<sn>,<mid>, <dcs>,<page>,<pages><CR><LF><data> (text
mode-enabled)
3 class 3 SMS-DELIVERS are routed directly using code in <mt>=2 ;
message of other classes result in indication <mt>=1
<ds> (for SMS-STATUS-REPORTs) :
0 no SMS-STATUS-REPORTs are routed.
1 SMS-STATUS-REPORTs are routed using unsolicited code :
+CDS : <pdu> (if PDU mode chosen)
or
+CDS : <fo>,<mr>[,<ra>,<tora>],<scts>,<dt>,<st>
<bfr>
0 TA buffer of unsolicited result codes defined within this command is
flushed to the TE when <mode> 1...3 is entered (OK response shall be
given before flushing the codes)
1 TA buffer of unsolicited result codes defined within this command is
cleared when <mode> 1...3 is entered.
Examples :
Application to GSM AT+CNMI=0,1,0,0,0 <mt>=1
GSM to application OK
GSM to application +CMTI : « SM », 1 Message received
Application to GSM AT+CNMI=0,2,0,0,0 <mt>=2
GSM to application OK
GSM to application +CMT :"123456","13/01/96
12h30m00s",129,4,32,240,"15379",129
,5<CR><LF>
HELLO
Message received
Application to GSM AT+CNMI=0,0,0,1,0 <ds>=1
GSM to application OK