User manual

Wavecom GSM Modem
This confidential document is the property of WAVECOM and may not be copied or circulated without permission
32
5.5. Save settings +CSAS
All settings specified in command +CSCA, +CMGF, +CSMP, +CNMI,
+CSDH are stored in E2PROM if the SIM card is phase 1 or in the SIM card if
this one is phase 2.
Application to GSM AT+CSAS Store
GSM to application OK command correct
5.6. Restore settings +CRES
All settings specified in command +CSCA, +CMGF, +CSMP, +CNMI,
+CSDH are restored from E2PROM if the SIM card is phase 1 or from the
SIM card if this one is phase 2.
Application to GSM AT+CRES Restore
GSM to application OK command correct
5.7. Show text Mode Parameters +CSDH
This commands gives more informations in text mode result codes.
These informations are in brackets in commands +CMTI, +CMT, +CDS,
+CMGR, +CMGL.
Application to GSM AT+CSDH? current value
GSM to application +CSDH: 0
OK
do not show header values
5.8. Select TE character set +CSCS
This commands informs the ME which character set is used by the TE.
ME is then able to convert character strings correctly. This is used for
commands +CMGS in text mode.
Application to GSM AT+CSCS="GSM" GSM default alphabet
GSM to application OK Command valid
Application to GSM AT+CSCS="PCCP437" PC character set Code
Page 437
GSM to application OK Command valid