User manual

Wavecom GSM Modem
This confidential document is the property of WAVECOM and may not be copied or circulated without permission
21
4.4. Manufacturer identification +CGMI
This command gives the manufacturer identification.
Application to GSM AT+CGMI get manufacturer identification
GSM to application WELCOME
OK
command valid (« WELCOME » is not a
manufacturer identification !)
4.5. Capabilities list +GCAP
This command gives the complete capabilities list.
Application to GSM AT+GCAP get capabilities list
GSM to application +CGSM
OK
supports GSM commands
4.6. Phone activity status +CPAS
This command returns the activity status of the mobile.
Application to GSM AT+CPAS Current activity status
GSM to application +CPAS: "x"
OK
"x" as defined in the GSM TS 07 07
4.7. Power off +CPOF
This command stops the GSM software stack and then the hardware
layer.
Application to GSM AT+CPOF
GSM to application OK command valid