User manual

Wavecom GSM Modem
This confidential document is the property of WAVECOM and may not be copied or circulated without permission
16
Application to GSM ATDL redial last number
GSM to application 0146290800;
OK
last call was a speech call
command valid
3.8. Signal Quality +CSQ
This command shall be used to know the signal strength indication.
Application to GSM AT+CSQ
GSM to application +CSQ: <rssi>,<ber>
OK
<rssi> and <ber> as defined in the
GSM TS 07 07
3.9. Network registration +CREG
This command is used by the application to know the registration status
of the mobile.
Application to GSM AT+CREG?
GSM to application +CREG: 0,<stat>
OK
as defined in the GSM TS 07 07
Application to GSM AT+CREG=1 automatically shots on
GSM to application OK command valid
3.10. Automatic answer ATS0
This S-parameter controls the automatic answering feature of the mobile.
Application to GSM ATS0=2 automatic answer after 2 rings
GSM to application OK
Application to GSM ATS0? Current value
GSM to application 002
OK
always 3 characters with leading
zeros
Application to GSM ATS0=0 no automatic answer
GSM to application OK command valid