Specifications

Wireless CPU
®
Q24 Series
Appendix
©Confidential Page: 79 / 83
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged without
prior written agreement.
WM_PGM_Q24NG_PTS_001-005 November 20, 2007
Specification Reference Title
GSM 09.07 V8.0.0
(1999-08)
m (Phase 2+);
General requirements on inter-working between the
N) or Public
Digital cellular telecommunications syste
Public Land Mobile Network (PLMN) and the
Integrated Services Digital Network (ISD
Switched Telephone Network (PSTN) (GSM 09.07
version 8.0.0 Release 1999)
3GPP TS 51.010-1 v7.3.1
Access Network ;Digital cellular telecommunications
system (Phase 2+);Mobile Station (MS) conformance
specification; Part 1: Conformance specification
(Release 7)
(2006-10)
Technical Specification Group GSM/EDGE ; Radio
3GPP TS 51.011 V5.0.0
Technical Specification Group Terminals; Specification
of the Subscriber Identity Module - Mobile Equipment
(2001-12)
(SIM - ME) interface (Release 5)
ETS 300 641
Digital cellular telecommunications system (Phase 2);
Specification of the 3 Volt Subscriber Identi
(1998-03) Mobile Equipment (SIM-ME) interface
(GSM 11.12 version 4.3.1)
ty Module -
GCF-CC V3.23.1
(2006-07)
Global Certification Forum – Certification criteria
NAPRD03 v3.8.1 North America Permanent
ce Document for PTCRB tests
(2006-08) Referen
The Wireless CPU
®
Quik Q24 series connected to a development kit board application
is certified to be in accordance with the following Rules and Regulations of the
Federal Communications Commission (FCC).
Power listed on the Gant is conducted for Part 22 and conducted for Part 24.
This device contains EGSM/GPRS Class 10 functions in the 900 and 1800MHz Band,
which are not operational in U.S. Territories.
This device can be used only for mobile and fixed applications. The antenna(s) used
for this transmitter must be installed at a distance of minimum 20 cm from all
persons and must not be co-located or operated with any other antenna or
satisfying RF exposure compliance.
Ant
and
operat
19
Installed in portable devices, the RF exposure condition requires a separate
mandatory equipment authorization for the final device.
transmitter.
Users and installers must be provided with antenna installation instructions and
transmitter operating conditions for
ennas used for this OEM module must not exceed 1.4 dBi gain for GSM 850 MHz
7 dBi for GSM 1900 MHz for fixed operating configurations. For mobile
ions the gain must not exceed 1.4 dBi for GSM 850 MHz and 3dBi for GSM
00 MHz. This device is approved as a module to be installed in other devices.