Specifications

WM_PRJ_Q2400_PTS_001 - 003
6th November 2002
confidential ©
Page :
43 / 70
This document is the sole and exclusive property of WAVECOM. Not to be distributed or divulged
without prior written agreement.
Ce document est la propriété exclusive de WAVECOM. Il ne peut être communiqué ou divulgué à
des tiers sans son autorisation préalable.
2.19.2 RF performances
RF performances are compliant with the ETSI recommendation 05.
The main parameters for the receiver are:
EGSM/900 Sensitivity: < -102 dBm Static & TUHigh
GSM1800 Sensitivity: < -102 dBm Static & TUHigh
Selectivity @ 200 kHz: > +9 dBc
Selectivity @ 400 kHz: > +41 dBc
Dynamic range: 63 dB
Co-channel rejection: >= 9 dBc
The main parameters for the transmitter are:
Maximum output power (EGSM): 33 dBm +/- 2 dB at ambient
temperature
Maximum output power (GSM1800): 30 dBm +/- 2 dB at ambient
temperature
Minimum output power (EGSM): 5 dBm +/- 5 dB at ambient
temperature
Minimum output power (GSM1800): 0 dBm +/- 5 dB at ambient
temperature
H2 level: < -30 dBm
H3 level: < -30 dBm
Noise in 925 - 935 MHz: < -67 dBm
Noise in 935 - 960 MHz: < -79 dBm
Noise in 1930 - 1990 MHz (GSM1900 band): < -71 dBm
Phase error at peak power: < 5 ° RMS
Frequency error: +/- 0.1 ppm max
2.19.3 Antenna specifications
The antenna must fulfil the following requirements:
Frequency bands: dual band E-GSM 900MHz – GSM 1900 MHz
EGSM 900 GSM 1900
Frequency RX 925 to 960 MHz 1930 to 1990 MHz
Frequency TX 880 to 915 MHz 1850 to 1910 MHz
Impedance: 50
VSWR Tx max 2:1 / Rx max 2:1
Typical radiated gain: 0dBi