User's Manual

. . . . .
SPECIFICATIONS
Radio Specifications
Hardware Installation Guide A-7
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5$',263(&,),&$7,216
Table A-7 Radio Specifications
Parameter Specification
Frequency Range 2400 GHz to 2483.5 GHz
Radio Technology Spread Spectrum using Direct Sequence
PN Sequence Length 32 bits
Modulation Technique BPSK
Channel Bandwidth
Model 1280: 41.0 MHz
Model 320: 10.2 MHz
Sync Word Length 32 bits
Processing Gain 12 dB
Radio Protocol TDMA (Time Division Multiple Access)
Frequency Stability ±5 ppm
System Gain
Model 1280: 115 dB
Model 320: 121 dB
Number of non-
overlapping channels
Model 1280: 2
Model 320: 7
Table A-8 Transmitter Specifications
Parameter Specification
Load Impedance 50 ohms
Power Output 0 dBm to 28 dBm
Accuracy
±1 dB overall RF channel
±3 dB @ 0 dBm
±1 dB from 0°C to 50°C (32°F to 122°F)
Output Level Control 28 settings, 1 dBm increments
RF Port Protection None
Table A-9 Receiver Specifications
Parameter Specification
Sensitivity
Model 1280: –86 dBm @ 10E
-6
BER
Model 320: –92 dBm @ 10E
-6
BER
Noise Figure 5 dB (RF LNA only)
Input Impedance 50 ohms
RF Input Protection None
Maximum RF Input Power –10 dBm
Dynamic Range 80 dB