User Manual

SPECIFICATIONS
General Specifications
A-4 P-Com AirPro Gold
A
LED INDICATORS
Figure A-2 Front Panel Indicators
Table A-3 Front Panel Indicators
Name Color Function
RSSI Green
Steady illumination of LEDs indicates the strongest/highest quality of the receive signal.
Sequential illumination of all 10 LEDs indicates radio initialization self-test is in progress.
Blinking of all 10 LEDs in addition to audible alarm indicates Configuration Reset DIP switch is
ON and that the radio initial configuration and manufacturing image are selected for next reboot.
Blinking of the 1st of the 10 LEDs in addition to audible alarm indicates the wrong RF channel is
set on the DIP switches.
Blinking of the 3rd of the 10 LEDs in addition to audible alarm indicates that digital board
initialization has failed.
ALARM Red ON = Major event in the link (including remote units fail).
LINK
Green ON = Link with far end unit/units is established.
ETHERNET
LINK
Green ON = Connection with Ethernet segment is established
ETHERNET
A
CTIVITY
Yellow ON = Activity on Ethernet segment
DATA TX Yellow ON = Unit tranmits the Data frame (the Control frames are not)
POWER
Yellow ON = power to the radio is on
APG2_007
net
RS232
RSSI
Alarm
Link
Ethernet Link
Ethernet Activity
Data TX
Power