User Manual

. . . . .
HARDWARE INSTALLATION
Basic Configuration Setup
Hardware Installation Guide 3-9
AirPro Gold Setup Configuration:
Equipment: AirPro Gold 20F.Net
*Ethernet MAC Address: XXXXXXXXXXXX
Topology: Star Remote (was selected) Point-to-Point (now selected)
RF Channel: 1 (was selected) 5 (now selected)
Modulation mode: 4 (was selected) 1 (now selected)
IP Address:
5 Confirm your settings by resetting by rebooting the unit.
• Turn Off and On or type Reboot.
• At the prompt, type INFO. This displays the configuration you set in
Steps 1, 2, and 3:
AirPro Gold Setup Configuration:
Equipment: AirPro Gold 20F.Net
*Ethernet MAC Address: XXXXXXXXXXXX
Topology: Point-to-Point
RF Channel: 5
Modulation mode: 1
IP Address:
SITE MANAGER APPLICATION
AirPro Gold can be configured through a Windows-based software
application call Site Manager. Site Manager runs on an external
computer connected remotely to the AirPro Gold unit over the LAN
through the
ETHERNET port, or over the public telephone network
through the RS232 port.
Site Manager is generally used by the network administrator for basic
configuration of a AirPro Gold unit and advanced configuration of a
wireless cluster of units.
If you want to set up the basic configuration using Site Manager, see the
Site Manager Reference. It will tell you how to install the application,
and how to use it.